Categories

    24H FLASH SALE

    CERPRISE PETG Filament 1.75mm1kg (EU ONLY)

    $27.99$13.99

    Technical Specification                                                        Filament Diameter: 1.75mm Tolerance: ±0.03mm Printing Temperature: 230°C-250°C Heated Bed Temperature: 70-85°C Printing Speed: 30-80mm/s Features High Dimensional Accuracy & Stronger Layer Adhesion: 1.75mm, tolerance +/-0.03mm. Stronger layer adhesion than PLA. Higher Toughness & Hardness:...

    CERPRiSE PLA Filament 1.75mm 1kg

    $29.99$15.00

    Product description: Technical SpecificationDiameter: 1.75mmTolerance: +/-0.03mmPrint Temperature: 190-220℃Recommended Printing Temperature: 210-220℃Recommended Print Speed: 40-60mm/s Features: High Accuracy:1.75mm, tolerance +/-0.03mm,feed smoothly and constantly without clogging the nozzle or extruder. No Tangling:...

    Premium PLA+ 3D Printer Filament 1kg

    from $18.90

    ·Reviewed by John Aldred 
    Eryone PLA+ 3D printer filament.Is it better than PETG?
    ·Review by Andrew Sink  
    3D Printing with REALLY WET filament / Eryone PLA+
     
    ·Tougher than Standard PLA.
    ·Accurate filament diameter(mm)1.75±0.03,Extrude smoothly under 200 ℃.
    ·Wide temp adaptation,Print very good between 190-230℃ without clogging.
    ·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220℃.
    ·Work very well on your printers..
    ·Net weight 1kg, Shipping weight 1.28kg .
    ·Recommend print temperature (℃) 200~230.
    ·Recommend print speed(mm/s) 30~70.
    ·Recommend heated bed(℃) 60~70

    Premium 1.75mm PETG Filament 1kg (US&CA&UK Only)

    $29.99$13.99

    ·Operating temp range: 220℃-240℃(446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
    ·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
    ·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.

    Eryone Water Washable 3D Printer Resin 500G -(US ONLY)

    $21.99$11.00

    View Certifications
    View recommended setting
    Specification: 0.5KG
    Color: Black, white, gray, transparent, skin tone, magenta, cyan, yellow.
    The exposure time of the bottom layers: 40-120s.
    The number of bottom layers: 4-10 layers
    The exposure time: 4-10s
     Density: 1.05-1.25g/cm3 (densitometer(25℃))
    Lifting height: 5mm
    Lifting speed: 100-300mm/min

    CERPRiSE Silk PLA Filament 1.75mm 1kg (EU ONLY)

    $32.99$19.00

    PLA Filament Technical Specification                                                        Filament Diameter: 1.75mm Tolerance: ±0.05mm Printing Temperature: 190°C-220°C Heated Bed Temperature: 55-70°C Printing Speed: 30-60mm/s Highlights High Gloss & Smoother: The surface of the silk PLA has some...

    Premium 1.75mm Silk PLA Filament 1kg (US&CA&UK Only)

    $32.99$19.00

    ·Read TEST BLOG  by Eryone QC Andy When.

    ·Like silk, Highlight shiny silky smooth appearance.
    ·PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
    ·1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
    ·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15
    ·Recommended Extrusion/Nozzle Temperature 190℃-220℃

    Offer Ends In:

    3D Printer Photopolymer Resin 500G (US&CA ONLY)

    from $11.00

    View Certifications
    View recommended setting

    Specification: 0.5KG/1KG.
    Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
    The exposure time of the bottom layers: 40-120s.
    The number of bottom layers: 4-10 layers
    The exposure time: 4-10s
    Density: 1.05-1.25g/cm3 (densitometer(25℃)
    Lifting height: 5mm
    Lifting speed: 100-300mm/min

    Premium 1.75mm TPU 3D Printer Filament 0.5kg (US&CA&UK Only)

    $23.99$12.99

    ·TPU 3D Printer Filament Vacuumed Sealed With Desiccant.
    ·1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
    ·0.5 kg (1.1 lbs) /spool.
    ·Recommended Extrusion/Nozzle Temperature 190 - 220℃ (374 - 428℉)
    ·Shore hardness 95A

    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    January,February,March,April,May,June,July,August,September,October,November,December
    Not enough items available. Only [max] left.
    Add to WishlistBrowse WishlistRemove Wishlist
    Shopping cart

    Your cart is empty.

    Return To Shop

    Add Order Note Edit Order Note
    Estimate Shipping
    Add A Coupon

    Estimate Shipping

    Add A Coupon

    Coupon code will work on checkout page

    English

    Select your language

    USD

    Select your currency