Bullet points:
1.Advanced material: it adopts flexible aviation material, which is tough and can be restored by itself after being bent, no deformation, and better fits hot beds; The hardness is much lower than metals(brass), no risk of scratching nozzles, and more convenient for leveling.
2.Advanced technology: the surface is frosted, which allows filament to attach to the surface easily without falling off.
3.Removable: this printing surface can be freely remvoed from a heated bed. After printing, simply remove the build surface from a hot bed and bend it down to make prints separate from it.
4.Advantages compared to glass plate: detachable, lighter weight, no risk of chipping; no coating on the surface, which can be grinding if it’s scratched, and then use again.
5.Compatibility: compatible with hot beds of all FDM printers from Prusa, Anycubic, etc.
[ERYONE Magnetic Flexible Print Platform
Build Surface for 3D Printer]
Have you any trouble in printing?
The material does not stick on your heated bed surface?
The print is perfect, but it's damaged when you take it off from the printing platform.
Upgrade your 3D printer printing platform.
Chose you need size for your printer:
235*235*2MM,
Our Flexible Build Surface are made from high quality aviation material that won't kink or warp when you flex them, they just return back to shape!
Our magnets and films have all been formulated to resist over 130℃ / 226℃ so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
Simply take off the Build Surface from the hot bed plate Magnetic Base on your 3D printer when the print is finished and flex slightly to pop your print right off!
1.Advanced material: it adopts flexible aviation material, which is tough and can be restored by itself after being bent, no deformation, and better fits hot beds; The hardness is much lower than metals(brass), no risk of scratching nozzles, and more convenient for leveling.
2.Advanced technology: the surface is frosted, which allows filament to attach to the surface easily without falling off.
3.Removable: this printing surface can be freely remvoed from a heated bed. After printing, simply remove the build surface from a hot bed and bend it down to make prints separate from it.
4.Advantages compared to glass plate: detachable, lighter weight, no risk of chipping; no coating on the surface, which can be grinding if it’s scratched, and then use again.
5.Compatibility: compatible with hot beds of all FDM printers from Prusa, Anycubic, etc.
[ERYONE Magnetic Flexible Print Platform
Build Surface for 3D Printer]
Have you any trouble in printing?
The material does not stick on your heated bed surface?
The print is perfect, but it's damaged when you take it off from the printing platform.
Upgrade your 3D printer printing platform.
Chose you need size for your printer:
235*235*2MM,
Our Flexible Build Surface are made from high quality aviation material that won't kink or warp when you flex them, they just return back to shape!
Our magnets and films have all been formulated to resist over 130℃ / 226℃ so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
Simply take off the Build Surface from the hot bed plate Magnetic Base on your 3D printer when the print is finished and flex slightly to pop your print right off!
