METALLIC SILK RAINBOW PLA

W  H  Y     I  T    I  S     S   P  E  C  I  A  L

The metal silk rainbow PLA is based on the original silk rainbow color scheme, and we have added a metal shiny color scheme. Let some areas of the print show a metallic luster, which is more charming.

S  P  E C I  F I C A T I O N

F  E  A  T  U  R  E  S

Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it

PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant. 1.75mm filament diameter (dimensional accuracy +/- 0.05mm). 1 kg (2.2 lbs) /spool.  Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15

The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple.

Printing recommend setting

Ender3/CR10/Mega-S/Thinker S/Thinker SE/ER-20 WITH BOWDEN EXTRUDER
Nozzle temperature: 190~220℃
Heated bed temperature
1) PEI Magnetic print surface: 55~70℃
2) Glass Bed: 65~70℃
Printer speed: 30~60mm/s
Retract speed: 80~100mm/s
Retract length: 4~5mm

Prusa i3 MK2/MK3/MK3S WITH DIRECT DRIVE EXTRUDER
Nozzle temperature: 190~220℃
Heated bed temperature
1) PEI Magnetic print surface: 55~70℃
Printer speed: 30~60mm/s
Retract speed: 30~40mm/s
Retract length: 0.8~1.5mm

FAQ

1. If you do not use filament for a long time, please keep them in a cool (temperature lower than 32℃), dry environment (humidity lower than 40%) in time
2. Please use a soft cloth to clean the nozzles before and after printing to avoid residual filament from affecting the printer
3. If you find the filament under extrusion, please check whether the feeder spring is too loose and causes the filament to slip. And the filament too tight can cause the filaments to be damaged by the gear;
4. For more information, please refer to:

https://www.eryone.com/forum