Productos

·Status:in manufacture Feb,8th

·15% OFF code"PREORDER *at checkout,ship upon arrival in April,preorder ends in Mar.15 th
·Silky Metallic rainbow PLA,bringing exciting visual experience.

Ender3/CR10/Mega-S/Thinker S/Thinker SE/ER-20 WITH BOWDEN EXTRUDER
Nozzle temperature: 190~220℃ Heated bed temperature 
1) PEI Magnetic print surface: 55~70℃
2) Glass Bed: 65~70℃
Printer speed: 30~60mm/s
Retract speed: 80~100mm/s
Retract length: 4~5mm
Prusa i3 MK2/MK3/MK3S WITH DIRECT DRIVE EXTRUDER Nozzle temperature: 190~220℃ Heated bed temperature
1) PEI Magnetic print surface: 55~70℃
Printer speed: 30~60mm/s
Retract speed: 30~40mm/s
Retract length: 0.8~1.5mm

·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.

PLA Filament Technical Specification                                                        Filament Diameter: 1.75mm Tolerance: ±0.05mm Printing Temperature: 190°C-220°C Heated Bed Temperature: 55-70°C Printing Speed: 30－60mm/s Highlights High Gloss & Smoother: The surface of the silk PLA has some...

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

El arte del mate Hay luz y oscuridad, luminancia y mate, ahora que Eryone tiene pla de seda brillante, pero en la impresión 3D, también necesitamos filamentos tan artísticos y...

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

ABS+ Product information & technical details Item no.: ERYONE ABS+ Filament Manufacturer No.: ABS+-WHITE/BLACK-B0118002 Manufacturers: ERYONE Content: 1.000 kg Diameter: 1,75 mm, 2,85 mm Product types: ABS Filaments Filament colour: Black,...

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

New Arrival- ERYONE ABS LIKE RESIN 1KG product description Outstanding Toughness: ABS-like resinretains most of the mechanical properties of ABS plastic, with excellent tensile       strength, bending strength...

New Arrival- ERYONE 3D Printer Photopolymer Resin Super Low Odor, General LCD UV-Curing Resin 405nm for LCD 3D Printing 1kG Low odor resin: Bullet Points: -Very Safe resin, Super Low odor:...

NO  IPA  HASSLE, JUST  ClEAN WITH WATER One of biggest advantages of eryone water washable resin is that it doesn't require IPA (isopropyl alcohol) for post curing, while still maintaining the excellent qualities...

View Certifications
View recommended setting

Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃)
Lifting height: 5mm
Lifting speed: 100-300mm/min

Highlights: -High-quality brushless 6010 DC 24V fan, sleeve-bearing design cooling cooler. -Plastic construction 11 blade fan. Dual Ball Bearing; Speed: 3100 ±5% RPM; Wind Volume: 11.2CFM -DC Brushless Cooling Fan,...

New Arrival- ERYONE ABS LIKE RESIN 1KG product description Outstanding Toughness: ABS-like resinretains most of the mechanical properties of ABS plastic, with excellent tensile       strength, bending strength...

15% OFF preorder code PREORDER ,preorder ends in March 31th,ship upon arrival in April
 View recommended setting
 
Specification: 0.5KG/bottle
Color: Black, white, gray, clear, red orange, transparent blue.
The exposure time of the bottom layers: 50-100s (chromatic color display), 25-40s (monochrome display)
The Exposure Time: 4-8s (chromatic color display), 3-4s (monochrome display)
The number of bottom layers: 4-10 layers
Density: 1.05-1.25g/cm3  (densitometer (25℃))
Lifting Height: 5-10mm
Lifting Speed: 100-200mm/min

15% OFF preorder code PREORDER ,preorder ends in March 31th,ship upon arrival in April
 View recommended setting
 
Specification: 0.5KG/bottle
Color: Black, white, gray, clear, red orange, transparent blue.
The exposure time of the bottom layers: 50-100s (chromatic color display), 25-40s (monochrome display)
The Exposure Time: 4-8s (chromatic color display), 3-4s (monochrome display)
The number of bottom layers: 4-10 layers
Density: 1.05-1.25g/cm3  (densitometer (25℃))
Lifting Height: 5-10mm
Lifting Speed: 100-200mm/min

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

Shipping: Ship from China These the clips that come with the ER-20 3D printer to hold the glass bed.

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

El paquete incluye: cama de vidrio x 1, resorte de compresión x 5 (regalo) (para la actualización de la cama de vidrio ER20). Cuando reciba el paquete, verifique estas piezas...

Highlights:1. ERY32MINI Motherboard use the STM32F103 as the mainboard2. ERY32MINI Motherboard built-in the TMC2209 silent stepper driver3. ERY32MINI Motherboard design is very compact, but powerful4. ERY32MINI Motherboard can suitable for...

Extruder Gear/Pulley 1. Teeth number: 36T 2. Outer diameter: 11mm 3. Inner diameter: 5mm 4. Height: 11mm 5. Material: Brass Extruder Spring 1. Outer diameter: 8mm 2. Inner diameter: 4mm...

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

Package Include: 0.4MM Nozzle*1, Heat Cartridge*1, Silicone socks*1, Throat*1. Parameter: input diameter: 1.75mm; output diameter: 0.4mm; size: 3.1cm*2.2cm*2.3cm Fit for: Thinker, Thinker S(v1/v2) ,Thinker SE and ER-20 Premium Material &...

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

Warm reminder: Regarding the delivery time, we will use air freight and it is expected to be delivered about one month after the order is placed.When products arrive at the...

Bullet points:1.Advanced material: it adopts flexible aviation material, which is tough and can be restored by itself after being bent, no deformation, and better fits hot beds; The hardness is...

Features: 1. The hotend’s core parts are mainly composed of copper alloy, which has the advantage of better heat conduction.2. Overall high temperature resistance up to 500℃
.3. Heat sink and...

How Can Install On The ER-20? The ER20 firmware: https://github.com/Eryone/STM32/relea...) The stl file for the ER20: https://www.eryone.com/forum/viewtopi... If you have any problem please send email to: technical@eryone.com 1. The hotend’s...

  1. The HF version uses a lengthened nozzle design, which is more suitable for high flow and high speed printing2. The HF version uses a one-piece welded nozzle for...