FeatureοΌ The surface of the print has a matte (matte) effect, which is suitable for printing artwork. SpecificationsοΌ Filament Diameter: 1.75mm Tolerance: Β±0.03mm Printing Temperature:Β 190Β°C-220Β°C Heated Bed Temperature: 55-70Β°C Printing...
Β·Reviewed by John Aldred
Eryone PLA+ 3D printer filament.Is it better than PETG?
Β·Review by Andrew Sink
3D Printing with REALLY WET filament / Eryone PLA+
Β·Tougher than Standard PLA.
Β·Accurate filament diameter(mm)1.75Β±0.03οΌExtrude smoothly under 200 β.
Β·Wide temp adaptation,Print very good between 190-230β without clogging.
Β·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220β.
Β·Work very well on your printers..
Β·Net weight 1kg, Shipping weight 1.28kg .
Β·Recommend print temperature (β) 200~230.
Β·Recommend print speed(mm/s) 30~70.
Β·Recommend heated bed(β) 60~70
Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg
Β·Operating temp range: 220β-240βοΌ446Β°F-464Β°F),heated Bed Temp: 80Β°C - 90Β°C (176β - 194β). Note: Printing temperature of first layer should be over 230β
Β·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
Β·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
Β·Operating temp range: 220β-240βοΌ446Β°F-464Β°F),heated Bed Temp: 80Β°C - 90Β°C (176β - 194β). Note: Printing temperature of first layer should be over 230β
Β·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
Β·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
Technical SpecificationΒ Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Β Filament Diameter: 1.75mm Tolerance: Β±0.03mm Printing Temperature:Β 230Β°C-250Β°C Heated Bed Temperature: 70-85Β°C Printing Speed: 30-80mm/s Features High Dimensional AccuracyΒ &Β StrongerΒ Layer Adhesion: 1.75mm, tolerance +/-0.03mm. StrongerΒ layer adhesionΒ than PLA. Higher ToughnessΒ & Hardness:...
FeatureοΌ The surface of the print has a matte (matte) effect, which is suitable for printing artwork. SpecificationsοΌ Filament Diameter: 1.75mm Tolerance: Β±0.03mm Printing Temperature:Β 190Β°C-220Β°C Heated Bed Temperature: 55-70Β°C Printing...
Diameter: 1.75mm
Β·Tolerance: +/-0.03mm
Β·Print Temperature: 195-215β
Β·Recommended Print Speed: 30-60mm/s
Matte PLA review byΒ Β Parliamo di Maker Matte PLA review by INOV3D FeatureοΌ The surface of the print has a matte (matte) effect, which is suitable for printing artwork. SpecificationsοΌ Filament...
Β·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
Β·Professional Packaging - Vacuumed Sealed with a desiccant bag
Β·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Β·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
Β·Print Temperature: 195- 230β
Β·Recommended Print Speed: 30-60mm/s
Β·Online Tech Support β
Β·Status:in manufacture Feb,8th
Β·15% OFF code"PREORDER *at checkout,ship upon arrival in April,preorder ends in Mar.15 th
Β·Silky Metallic rainbow PLA,bringing exciting visual experience.
Ender3/CR10/Mega-S/Thinker S/Thinker SE/ER-20 WITH BOWDEN EXTRUDER
Nozzle temperature: 190~220β Heated bed temperature
1) PEI Magnetic print surface: 55~70β
2) Glass Bed: 65~70β
Printer speed: 30~60mm/s
Retract speed: 80~100mm/s
Retract length: 4~5mm
Prusa i3 MK2/MK3/MK3S WITH DIRECT DRIVE EXTRUDER Nozzle temperature: 190~220β Heated bed temperature
1) PEI Magnetic print surface: 55~70β
Printer speed: 30~60mm/s
Retract speed: 30~40mm/s
Retract length: 0.8~1.5mm
Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg
Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg