Products

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
·Professional Packaging - Vacuumed Sealed with a desiccant bag
·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Print Temperature: 195- 230℃
·Recommended Print Speed: 30-60mm/s
·Online Tech Support √

Matte PLA review by  Parliamo di Maker Matte PLA review by INOV3D Feature： The surface of the print has a matte (matte) effect, which is suitable for printing artwork. Specifications： Filament...

Diameter: 1.75mm
·Tolerance: +/-0.03mm
·Print Temperature: 195-215℃
·Recommended Print Speed: 30-60mm/s

·Reviewed by John Aldred 
Eryone PLA+ 3D printer filament.Is it better than PETG?
·Review by Andrew Sink  
3D Printing with REALLY WET filament / Eryone PLA+
 
·Tougher than Standard PLA.
·Accurate filament diameter(mm)1.75±0.03，Extrude smoothly under 200 ℃.
·Wide temp adaptation,Print very good between 190-230℃ without clogging.
·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220℃.
·Work very well on your printers..
·Net weight 1kg, Shipping weight 1.28kg .
·Recommend print temperature (℃) 200~230.
·Recommend print speed(mm/s) 30~70.
·Recommend heated bed(℃) 60~70

·Status:in manufacture Feb,8th

·15% OFF code"PREORDER *at checkout,ship upon arrival in April,preorder ends in Mar.15 th
·Silky Metallic rainbow PLA,bringing exciting visual experience.

Ender3/CR10/Mega-S/Thinker S/Thinker SE/ER-20 WITH BOWDEN EXTRUDER
Nozzle temperature: 190~220℃ Heated bed temperature 
1) PEI Magnetic print surface: 55~70℃
2) Glass Bed: 65~70℃
Printer speed: 30~60mm/s
Retract speed: 80~100mm/s
Retract length: 4~5mm
Prusa i3 MK2/MK3/MK3S WITH DIRECT DRIVE EXTRUDER Nozzle temperature: 190~220℃ Heated bed temperature
1) PEI Magnetic print surface: 55~70℃
Printer speed: 30~60mm/s
Retract speed: 30~40mm/s
Retract length: 0.8~1.5mm

·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

Warm tips:1, the product is a new pre-sale products, divided into finished products (1KG) and samples (10M), there is no stock, you need to produce separately after purchase.2, About the...

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

Warm tips:1, the product is a new pre-sale products, divided into finished products (1KG) and samples (10M), there is no stock, you need to produce separately after purchase.2, About the...

Delivery time & Production Stage At present, our X400 3D printer has entered the production stage. It will take approximately 2 to 3 months from placing an order to receiving...

Neat Winding The PLA threads are arranged neatly, without the risk of knotting that making printing more comfortable. Premium Quality Material wire diameter 1.75mm±0.03mm, ensure smooth output line, vacuum packaging...

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

Warm tips:1, the product is a new pre-sale products, divided into finished products (1KG) and samples (10M), there is no stock, you need to produce separately after purchase.2, About the...

·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.

Are you want try Tri-Color silk(One wire with 3 different colors)? Are you be hesitated because of high price for 1kg spool? WE offer samples with lowest budget that you can try...

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

ABS+ Product information & technical details Item no.: ERYONE ABS+ Filament Manufacturer No.: ABS+-WHITE/BLACK-B0118002 Manufacturers: ERYONE Content: 1.000 kg Diameter: 1,75 mm, 2,85 mm Product types: ABS Filaments Filament colour: Black,...

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

Highlights: -High-quality mini brushless 3010 DC 5V fan, sleeve-bearing design cooling cooler. -Plastic construction 5 blade fan. Dual Ball Bearing; Speed: 8000 ±10% RPM; Wind Volume: 2.5CFM -DC Brushless Cooling...

View Certifications
View recommended setting

Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃)
Lifting height: 5mm
Lifting speed: 100-300mm/min

Highlights: -High-quality mini brushless 4010 DC 5V fan, sleeve-bearing design cooling cooler. -Plastic construction 5 blade fan. Dual Ball Bearing; Speed: 8000 ±10% RPM; Wind Volume: 2.5CFM -DC Brushless Cooling...

Highlights: -High-quality brushless 6010 DC 24V fan, sleeve-bearing design cooling cooler. -Plastic construction 11 blade fan. Dual Ball Bearing; Speed: 3100 ±5% RPM; Wind Volume: 11.2CFM -DC Brushless Cooling Fan,...

New Arrival- ERYONE ABS LIKE RESIN 1KG product description Outstanding Toughness: ABS-like resinretains most of the mechanical properties of ABS plastic, with excellent tensile       strength, bending strength...

New Arrival- ERYONE ABS LIKE RESIN 1KG product description Outstanding Toughness: ABS-like resinretains most of the mechanical properties of ABS plastic, with excellent tensile       strength, bending strength...

15% OFF preorder code PREORDER ,preorder ends in March 31th,ship upon arrival in April
 View recommended setting
 
Specification: 0.5KG/bottle
Color: Black, white, gray, clear, red orange, transparent blue.
The exposure time of the bottom layers: 50-100s (chromatic color display), 25-40s (monochrome display)
The Exposure Time: 4-8s (chromatic color display), 3-4s (monochrome display)
The number of bottom layers: 4-10 layers
Density: 1.05-1.25g/cm3  (densitometer (25℃))
Lifting Height: 5-10mm
Lifting Speed: 100-200mm/min

15% OFF preorder code PREORDER ,preorder ends in March 31th,ship upon arrival in April
 View recommended setting
 
Specification: 0.5KG/bottle
Color: Black, white, gray, clear, red orange, transparent blue.
The exposure time of the bottom layers: 50-100s (chromatic color display), 25-40s (monochrome display)
The Exposure Time: 4-8s (chromatic color display), 3-4s (monochrome display)
The number of bottom layers: 4-10 layers
Density: 1.05-1.25g/cm3  (densitometer (25℃))
Lifting Height: 5-10mm
Lifting Speed: 100-200mm/min

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

Shipping: Ship from China These the clips that come with the ER-20 3D printer to hold the glass bed.

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

                            260X230MM Glass Bed For ER20 No edge curling, the prints could stick on the bed firmly without glue, avoiding the issue of the print edges curling Ink-coating surface, easy...

Highlights:1. ERY32MINI Motherboard use the STM32F103 as the mainboard2. ERY32MINI Motherboard built-in the TMC2209 silent stepper driver3. ERY32MINI Motherboard design is very compact, but powerful4. ERY32MINI Motherboard can suitable for...

Extruder Gear/Pulley 1. Teeth number: 36T 2. Outer diameter: 11mm 3. Inner diameter: 5mm 4. Height: 11mm 5. Material: Brass Extruder Spring 1. Outer diameter: 8mm 2. Inner diameter: 4mm...

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

Package Include: 0.4MM Nozzle*1, Heat Cartridge*1, Silicone socks*1, Throat*1. Parameter: input diameter: 1.75mm; output diameter: 0.4mm; size: 3.1cm*2.2cm*2.3cm Fit for: Thinker, Thinker S(v1/v2) ,Thinker SE and ER-20 Premium Material &...

Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.

Features of L10 3D printer:Raspberry Pi motherboard7-inch touch screenMingwei Power SupplyZ axis NSK bearingShangyin High Precision Line TrackFully enclosed module10.1-inch 8K screen, Z-axis height 220mmCOB integrated light sourceLight intensity uniformity...