DEDICATED FOR MINIATURES
Eryone LCD/DLP standard resin was released in the early March of this year as the first resin product, stands out in the competition with super low odor, great printing capability, low shrinkage, fast curing,high detail,very easy to print with on every lcd printer on the market. your obvious choice for resin-based 3d printing especially miniature printing.
Recommended parameter:ET4-8s;BET：50-100s；layers:4-10；
Lifting distance:5mm;Lifting speed:50mm/min（300mm/s; layer height：0.05mm
Why is it special
No VOCs, no stinky smells, no harmful chemicals, ROHS and SDS certified.
High Print Quality, Vibrant Colors
High Precision, Low shrinkage
Non-Brittle
Great Fluidity
Fast Curing
Sensitive to 355nm~405nm UV light. Fast curing enables it to work with almost every LCD/DLP 3D printer, including Elegoo Mars,Anycubic Photon,Phrozen Sonic,Creality LD002R,EPAX,Nova,monoprice.etc.
Specifications
Bottom Exposure:20-100s
Normal Exposure:2-8s
Penetration Depth：0.124mm
Critical Exposure Value：0.7mj/cm2
Viscosity：150-300mpa.s
Liquid Density: 1.05-1.25g/cm2
Solid Density: 1.11-1.28 g/cm2
Recommended temperature:25°C-30℃
How much you get
500G/bottle.
Cautions
Use personal protection equipment (PPE)Wear appropriate chemical-resistant gloves (nitrile or neoprene) – DO NOT use latex gloves.
Use safety glasses/goggles with UV protection.
Wear a dust mask when sanding or post-finishing parts.
First aid procedures:Flush contaminated eyes or skin thoroughly with plenty of water for 15 minutes. Wash skin with soap and plenty of water or waterless cleaner if needed.If skin irritation or rash occurs, seek qualified medical attention.
If ingested, do not induce vomiting. Seek medical attention immediately.
Store correctly:
1.Keep resins sealed tightly in their containers, out of direct sunlight and within the temperature range of 20°C - 25°C.
2.A small headspace of air is needed to keep the resin from gelling. Do not fill resin containers to the top of the opening.
3.Do not pour used, uncured resin back into new resin bottles
4.Do not store uncured resin in refrigerators used for food and beverage storage
