Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg
Β·Operating temp range: 220β-240βοΌ446Β°F-464Β°F),heated Bed Temp: 80Β°C - 90Β°C (176β - 194β). Note: Printing temperature of first layer should be over 230β
Β·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
Β·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
Β·Reviewed by John Aldred
Eryone PLA+ 3D printer filament.Is it better than PETG?
Β·Review by Andrew Sink
3D Printing with REALLY WET filament / Eryone PLA+
Β·Tougher than Standard PLA.
Β·Accurate filament diameter(mm)1.75Β±0.03οΌExtrude smoothly under 200 β.
Β·Wide temp adaptation,Print very good between 190-230β without clogging.
Β·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220β.
Β·Work very well on your printers..
Β·Net weight 1kg, Shipping weight 1.28kg .
Β·Recommend print temperature (β) 200~230.
Β·Recommend print speed(mm/s) 30~70.
Β·Recommend heated bed(β) 60~70
Diameter: 1.75mm
Β·Tolerance: +/-0.03mm
Β·Print Temperature: 195-215β
Β·Recommended Print Speed: 30-60mm/s
Β·Status:in manufacture Feb,8th
Β·15% OFF code"PREORDER *at checkout,ship upon arrival in April,preorder ends in Mar.15 th
Β·Silky Metallic rainbow PLA,bringing exciting visual experience.
Ender3/CR10/Mega-S/Thinker S/Thinker SE/ER-20 WITH BOWDEN EXTRUDER
Nozzle temperature: 190~220β Heated bed temperature
1) PEI Magnetic print surface: 55~70β
2) Glass Bed: 65~70β
Printer speed: 30~60mm/s
Retract speed: 80~100mm/s
Retract length: 4~5mm
Prusa i3 MK2/MK3/MK3S WITH DIRECT DRIVE EXTRUDER Nozzle temperature: 190~220β Heated bed temperature
1) PEI Magnetic print surface: 55~70β
Printer speed: 30~60mm/s
Retract speed: 30~40mm/s
Retract length: 0.8~1.5mm
Matte PLA review byΒ Β Parliamo di Maker Matte PLA review by INOV3D FeatureοΌ The surface of the print has a matte (matte) effect, which is suitable for printing artwork. SpecificationsοΌ Filament...
Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg
Β·Operating temp range: 220β-240βοΌ446Β°F-464Β°F),heated Bed Temp: 80Β°C - 90Β°C (176β - 194β). Note: Printing temperature of first layer should be over 230β
Β·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
Β·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
Β·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
Β·Professional Packaging - Vacuumed Sealed with a desiccant bag
Β·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Β·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
Β·Print Temperature: 195- 230β
Β·Recommended Print Speed: 30-60mm/s
Β·Online Tech Support β
Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg
FeatureοΌ The surface of the print has a matte (matte) effect, which is suitable for printing artwork. SpecificationsοΌ Filament Diameter: 1.75mm Tolerance: Β±0.03mm Printing Temperature:Β 190Β°C-220Β°C Heated Bed Temperature: 55-70Β°C Printing...
View Certifications
View recommended setting
Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometerοΌ25β)
Lifting height: 5mm
Lifting speed: 100-300mm/min
15% OFF preorder code PREORDER ,preorder ends in March 31th,ship upon arrival in April
View recommended setting
Specification: 0.5KG/bottle
Color: Black, white, gray, clear, red orange, transparent blue.
The exposure time of the bottom layers: 50-100s (chromatic color display), 25-40s (monochrome display)
The Exposure Time: 4-8s (chromatic color display), 3-4s (monochrome display)
The number of bottom layers: 4-10 layers
Density: 1.05-1.25g/cm3 (densitometer (25β))
Lifting Height: 5-10mm
Lifting Speed: 100-200mm/min
New Arrival- ERYONE ABS LIKE RESIN 1KG product description Outstanding Toughness: ABS-like resinretains most of the mechanical properties of ABS plastic, with excellent tensile Β Β Β strength, bending strength...
View Certifications
View recommended setting
Specification: 0.5KG
Color: Black, white, gray, transparent, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometerοΌ25βοΌ)
Lifting height: 5mm
Lifting speed: 100-300mm/min
New Arrival- ERYONE 3D Printer Photopolymer Resin Super Low Odor, General LCD UV-Curing Resin 405nm for LCD 3D Printing 1kG Low odor resin: Bullet Points: -Very SafeΒ resin, Super Low odor:...
NOΒ IPAΒ HASSLE, JUSTΒ ClEAN WITH WATER One of biggest advantages of eryone water washable resin is that it doesn't requireΒ IPA (isopropyl alcohol)Β for post curing, while still maintainingΒ the excellent qualities...