Best Seller

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

Matte PLA review by  Parliamo di Maker Matte PLA review by INOV3D Feature： The surface of the print has a matte (matte) effect, which is suitable for printing artwork. Specifications： Filament...

·Reviewed by John Aldred 
Eryone PLA+ 3D printer filament.Is it better than PETG?
·Review by Andrew Sink  
3D Printing with REALLY WET filament / Eryone PLA+
 
·Tougher than Standard PLA.
·Accurate filament diameter(mm)1.75±0.03，Extrude smoothly under 200 ℃.
·Wide temp adaptation,Print very good between 190-230℃ without clogging.
·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220℃.
·Work very well on your printers..
·Net weight 1kg, Shipping weight 1.28kg .
·Recommend print temperature (℃) 200~230.
·Recommend print speed(mm/s) 30~70.
·Recommend heated bed(℃) 60~70

·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.

·Read TEST BLOG  by Eryone QC Andy When.

·Like silk, Highlight shiny silky smooth appearance.
·PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
·1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15
·Recommended Extrusion/Nozzle Temperature 190℃-220℃

Diameter: 1.75mm
·Tolerance: +/-0.03mm
·Print Temperature: 195-215℃
·Recommended Print Speed: 30-60mm/s

·Read TEST BLOG by Eryone QC Andy When.

·Marble effect: marble PLA is a mixture of pure PLA and healthy&safety marble elements, which produces natural marble effect.
·1.75mm in diameter and tolerance +/-0.05mm.
·Recommended Extrusion/Nozzle Temperature 190 - 220℃ (374 - 428° F )
·Marble 3D Printer PLA Filament Vacuumed Sealed With Desiccant
·Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"

View Certifications
View recommended setting

Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃)
Lifting height: 5mm
Lifting speed: 100-300mm/min