4th Anniversary Sale

New Arrival- ERYONE 3D Printer Photopolymer Resin Super Low Odor, General LCD UV-Curing Resin 405nm for LCD 3D Printing 1kG Low odor resin: Bullet Points: -Very Safe resin, Super Low odor:...

NO  IPA  HASSLE, JUST  ClEAN WITH WATER One of biggest advantages of eryone water washable resin is that it doesn't require IPA (isopropyl alcohol) for post curing, while still maintaining the excellent qualities...

New Arrival- ERYONE ABS LIKE RESIN 1KG product description Outstanding Toughness: ABS-like resinretains most of the mechanical properties of ABS plastic, with excellent tensile       strength, bending strength...

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

Matte PLA review by INOV3D Feature： The surface of the print has a matte (matte) effect, which is suitable for printing artwork. Specifications： Filament Diameter: 1.75mm Tolerance: ±0.03mm Printing Temperature: 190°C-220°C...

·TPU 3D Printer Filament Vacuumed Sealed With Desiccant.
·1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
·0.5 kg (1.1 lbs) /spool.
·Recommended Extrusion/Nozzle Temperature 190 - 220℃ (374 - 428℉)
·Shore hardness 95A

·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.

Diameter: 1.75mm
·Tolerance: +/-0.03mm
·Print Temperature: 195-215℃
·Recommended Print Speed: 30-60mm/s

·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
·Professional Packaging - Vacuumed Sealed with a desiccant bag
·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Print Temperature: 195- 230℃
·Recommended Print Speed: 30-60mm/s
·Online Tech Support √

·Reviewed by John Aldred 
Eryone PLA+ 3D printer filament.Is it better than PETG?
·Review by Andrew Sink  
3D Printing with REALLY WET filament / Eryone PLA+
 
·Tougher than Standard PLA.
·Accurate filament diameter(mm)1.75±0.03，Extrude smoothly under 200 ℃.
·Wide temp adaptation,Print very good between 190-230℃ without clogging.
·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220℃.
·Work very well on your printers..
·Net weight 1kg, Shipping weight 1.28kg .
·Recommend print temperature (℃) 200~230.
·Recommend print speed(mm/s) 30~70.
·Recommend heated bed(℃) 60~70

Wood 3D Printer Filament Vacuumed Sealed With Desiccant
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
Recommended Extrusion/Nozzle Temperature 190℃ - 220℃ (374℉ - 428℉)
15% WOOD Fibers, 1KG (2.2 lb) Spool
Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"

·Read TEST BLOG  by Eryone QC Andy When.

·Like silk, Highlight shiny silky smooth appearance.
·PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
·1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15
·Recommended Extrusion/Nozzle Temperature 190℃-220℃

Reviewed by FilamentStories

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
·Professional Packaging - Vacuumed Sealed with a desiccant bag
·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Print Temperature: 195- 230℃
·Recommended Print Speed: 30-60mm/s
·Online Tech Support √

Good Smell,Good Color,Good Print Quality Ingredients: PLA raw material, toughening agent, toner, sesame oil, etc. What can you use scented filament for?  1.Trust us, this is the only filament your...

Good Smell,Good Color,Good Print Quality Ingredients: PLA raw material, toughening agent, toner, sesame oil, etc. What can you use scented filament for?  1.Trust us, this is the only filament your...

View Certifications
View recommended setting
Specification: 0.5KG
Color: Black, white, gray, transparent, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
 Density: 1.05-1.25g/cm3 (densitometer（25℃）)
Lifting height: 5mm
Lifting speed: 100-300mm/min

View Certifications
View recommended setting

Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃)
Lifting height: 5mm
Lifting speed: 100-300mm/min

15% OFF preorder code PREORDER ,preorder ends in March 31th,ship upon arrival in April
 View recommended setting
 
Specification: 0.5KG/bottle
Color: Black, white, gray, clear, red orange, transparent blue.
The exposure time of the bottom layers: 50-100s (chromatic color display), 25-40s (monochrome display)
The Exposure Time: 4-8s (chromatic color display), 3-4s (monochrome display)
The number of bottom layers: 4-10 layers
Density: 1.05-1.25g/cm3  (densitometer (25℃))
Lifting Height: 5-10mm
Lifting Speed: 100-200mm/min