PLA Filament

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Status:in manufacture Feb,8th

·15% OFF code"PREORDER *at checkout,ship upon arrival in April,preorder ends in Mar.15 th
·Silky Metallic rainbow PLA,bringing exciting visual experience.

Ender3/CR10/Mega-S/Thinker S/Thinker SE/ER-20 WITH BOWDEN EXTRUDER
Nozzle temperature: 190~220℃ Heated bed temperature 
1) PEI Magnetic print surface: 55~70℃
2) Glass Bed: 65~70℃
Printer speed: 30~60mm/s
Retract speed: 80~100mm/s
Retract length: 4~5mm
Prusa i3 MK2/MK3/MK3S WITH DIRECT DRIVE EXTRUDER Nozzle temperature: 190~220℃ Heated bed temperature
1) PEI Magnetic print surface: 55~70℃
Printer speed: 30~60mm/s
Retract speed: 30~40mm/s
Retract length: 0.8~1.5mm

·For color change effect, please print Large work. About 4~10m/color.
·Professional Packaging | Vacuumed Sealed, 1.75mm and +/-0.05mm tolerance.
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Recommended Extrusion/Nozzle Temperature 195 - 215℃

·Diameter: 1.75mm
Tolerance: ± 0.05mm
Print Temperature: 190-220℃
Recommended Print Speed: 30-60mm/s

·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
·Professional Packaging - Vacuumed Sealed with a desiccant bag
·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Print Temperature: 195- 230℃
·Recommended Print Speed: 30-60mm/s
·Online Tech Support √

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Reviewed by John Aldred 
Eryone PLA+ 3D printer filament.Is it better than PETG?
·Review by Andrew Sink  
3D Printing with REALLY WET filament / Eryone PLA+
 
·Tougher than Standard PLA.
·Accurate filament diameter(mm)1.75±0.03，Extrude smoothly under 200 ℃.
·Wide temp adaptation,Print very good between 190-230℃ without clogging.
·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220℃.
·Work very well on your printers..
·Net weight 1kg, Shipping weight 1.28kg .
·Recommend print temperature (℃) 200~230.
·Recommend print speed(mm/s) 30~70.
·Recommend heated bed(℃) 60~70

·Read TEST BLOG  by Eryone QC Andy When.

·Like silk, Highlight shiny silky smooth appearance.
·PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
·1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15
·Recommended Extrusion/Nozzle Temperature 190℃-220℃

Diameter: 1.75mm
·Tolerance: +/-0.03mm
·Print Temperature: 195-215℃
·Recommended Print Speed: 30-60mm/s