Mega Pack Deals-Bundle Mega Sale
PETG (stark und einfach zu bedienen)
ab $12.00·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
STANDARD PLA
ab $13.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
PLA+ (härtere PLA.einfach zu verwenden)
ab $14.00 ·10% Code ERYONE3D an der Kasse, 15% Rabatt beim Kauf von 6 Rollen oder mehr · Bewertet von John Aldred Eryone PLA + 3D-Druckerfilament. Ist es besser als PETG? · Härter als Standard-PLA, keine Angst vor sprödem Filament, Drucke brechen.
· Genauer Filamentdurchmesser (mm) 1,75 ± 0,03 ， Extrudieren Sie sanft unter 200 ℃.
·· Breite Temperaturanpassung, Druck sehr gut zwischen 190-230 ℃ ohne Verstopfung.
·· Sie können das Hervorragendste, Glänzendste, Glatteste, Schönste erzielen Drucke zwischen 200 und 220
· Nettogewicht 1 kg, Versandgewicht 1,28 kg.
·· Empfehlen Sie die Drucktemperatur (℃) 200 ~ 230.
·· Druckgeschwindigkeit (mm / s) 30 ~ 70 empfehlen.
· Heizbett (℃) 60 ~ 70 empfehlen
STANDARD PLA
ab $13.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
ab $13.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
PETG (stark und einfach zu bedienen)
ab $11.99·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
STANDARD RESIN(500G)
View Certifications
View recommended setting
Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃)
Lifting height: 5mm
Lifting speed: 100-300mm/min
ABS WIE Harz
ab $13.7915% OFF preorder code PREORDER ,preorder ends in March 31th,ship upon arrival in April
View recommended setting
Specification: 0.5KG/bottle
Color: Black, white, gray, clear, red orange, transparent blue.
The exposure time of the bottom layers: 50-100s (chromatic color display), 25-40s (monochrome display)
The Exposure Time: 4-8s (chromatic color display), 3-4s (monochrome display)
The number of bottom layers: 4-10 layers
Density: 1.05-1.25g/cm3 (densitometer (25℃))
Lifting Height: 5-10mm
Lifting Speed: 100-200mm/min
WASSERSPÜLHARZ (500G)
View Certifications
View recommended setting
Specification: 0.5KG
Color: Black, white, gray, transparent, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃）)
Lifting height: 5mm
Lifting speed: 100-300mm/min