eryone3deryone3deryone3d

PLA Silk Triple-Color Filament - 1.75mm±0.03mm (1kg)

$37.99

Shipping calculated at checkout.

SHIP TO: US (TO US ONLY)

  • US (TO US ONLY)
  • EU (TO EU ONLY)
  • UK (TO UK ONLY)
  • CA (TO CA ONLY)

COLOR: Black&Blue&Purple

  • Black&Blue&Purple
  • RED&YELLOW&BLUE
  • ORANGE&BLUE&GREEN
  • Twisted Rainbow-Shadow-Black&Blue&Purple
  • Twisted Rainbow-Tracing-Red&Blue&Green
  • Twisted Rainbow-Fire-Red&Gold&Purple
  • Twisted Rainbow-Psychedelic-Red&Yellow&Blue
  • Dark Green & Midnight Blue & Black
  • RED&BLUE&GREEN
  • RED&GOLD&PURPLE
  • Black&Gold&Purple
  • Red&Purple&Green
  • Dark green&Purple&Yellow
  • Gold&Blue&Purple
  • Gold&Green&Purple
  • Black & Red & Gold
  • GOLD&SILVER&COPPER
  • Sapphire green & Orange red & Gold
  • Purple & Teal & Burnt Orange
Produit en rupture

Avertissez-moi lorsque ce produit est disponible :

visaamerican expressmastergoogle paypaypalshopify payapple pay



Are you be hesitated because of high price for 1kg spool?

WE offer samples with lowest budget that you can try aewsome filaments!

ERYONE High speed Triple-Color Silk PLA IS COMING!


ERYONE Triple-Color Silk PLA Filament for 3D Printers,1kg (2.2LBS)/Spool 1.75mm,Accuracy +/- 0.03 mm


 

Why choose ERYONE for your 3D Printing Needs?

ERYONE focus on 3d printing filament research and development over 6 years! We have Much more experience of 3d printing filament so that offer best products and services.Our products cover almost all types of filament.Such as PLA filaments: PLA;PLA+;Matte PLA;Silk PLA;Ultra Silk PLA;Galaxy PLA;Rainbow PLA;Glow in the dark PLA;Carbon fiber PLA;Scented PLA;Wood PLA;Marble PLA. PETG Filaments: PETG;Galaxy PETG;Carbon fiber PETG. TPU Filaments: TPU;Rainbow TPU. ABS;ASA;Nylon etc. Of course we will keep to update and release new all the way!

 

Triple-Color PLA Features :

  • 3 independent colors in one strand of filament
  • Silky, Glossy and Gorgeous 3 color change effect on 3 sides of prints offers you stunning visual enjoyment
  • High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm.
  • Neatly Winding, High Quality, No bubble or dust with vacuum storage bags inside
  • Compatible with most commonly used 3d printers


Technical Specification :

  • Filament Diameter: 1.75mm
  • Tolerance: ±0.03mm
  • Printing Temperature:190°C-220°C
  • Heated Bed Temperature: 60-70℃ 
  • Printing Speed:30-100mm/s 


Part I:Suggests Printing Parameters

Parameter  Set up
Nozzle temperature 190℃-220℃
Bed temperature 55-70℃
Bed materia glass, PEI, spring steel plate
Bottom printing temperature 190℃-220℃
Sealed printing supports open printing, and the sealing effect is
better if it is sealed
Printing speed 30-100mm/s
Drying conditions 55℃,8H

 

Part II:Physical Properties of Materials

Property Testing Method Unit  Typical Value
Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ 1.32
Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) 56
Heat distortion temperature(° C) ASTM D648 1.8MPa 0.45MPa 53
Glass transition temperature (° C) DSC, 10 ° C/min 63
Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min 20.5±1.5

 

Part III:Mechanical Properties of Printed Samples

Property Test conditions Test standards unit  Typical Value
Tensile strength X-Y 50mm/min GB/T 1040.4 MPa 49.8
Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa 1724.9
Elongation at break X-Y 50mm/min GB/T 1040.4 % 1.7
Tensile strength X-Z 50mm/min GB/T 1843 MPa 11
Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa 1653.5
Elongation at break X-Z 50mm/min GB/T 1040.4 % 1.1
Bending strength 2mm/min GB/T 9341 MPa 66.7
Bending modulus 2mm/min GB/T 9341 MPa 2315.5
Charpy Impact strenght 2.75J GB/T 1043.1-2008 kJ/m2 7.5

 

ERYONE Triple-Color Silk PLA Filament for 3D Printers,1kg (2.2LBS)/Spool 1.75mm,Accuracy +/- 0.03 mm
ERYONE Triple-Color Silk PLA Filament for 3D Printers,1kg (2.2LBS)/Spool 1.75mm,Accuracy +/- 0.03 mm

 

Warmly Note :

- If the consumables are not used for a long time, please keep them in a cool (temperature lower than 32℃) and dry environment (humidity lower than 40%) in time.

- Use a soft cloth to clean the nozzles before and after printing to avoid residual consumables from affecting the printer.

- If there is a problem of material blocking, please check whether the feeder spring is too loose to cause the filament to slip, and too tight to cause the filament to be damaged by the gear.

- The interlayer adhesion of silk consumables is weak. If the printed product is relatively thin, it will be easily torn laterally after being stressed. The hygroscopicity of silk consumables is stronger than that of standard PLA, so attention should be paid to sealing and drying.

- The Triple-Color pla cross is more obvious, the reasons as below:

  • Winding, here is a small roll of consumables, and its winding is not uniform, which is also an important reason for the three-color cross.
  • The more colors of the same section, the smaller the proportion of each color, so the probability of color crossing will be greater.

Summer Sale: Save 55% on Tri-Color and Dual-Color filaments! Use code 'MultiColorSale'.

Base de connaissances Delivery&Return d'Eryone3d

-Porteurs et temps de livraison

-En raison de la vente d'Eryone3d dans plusieurs régions. L'efficacité du transport varie donc d'une région à l'autre, d'un transporteur à l'autre. Les informations suivantes sont données à titre indicatif.

-Track my order first.first you could use below carrier website with the tracking number you are sent by us

-En raison de l'impact de l'épidémie, la logistique sera affectée. Veuillez comprendre et attendre patiemment.

Région

Transporteur

Délai de livraison (jour)

Site web du transporteur

Allemagne

DHL

2-3

piste

France

DHL

4-6 piste

Autres UE countries(Italy,Espagne etc)

DHL

4-6

piste

Autres pays de l'UE

GSL

4-6

piste

Autres pays de l'UE DPD 4-6 piste

ROYAUME-UNI

Royal Mail

1-5

piste

ÉTATS-UNIS

Fedex

2-5

piste

ÉTATS-UNIS

UPS

2-7

piste

ÉTATS-UNIS

USPS

2-7

piste

CA

Fedex

1-5

piste

CA

Poste canadienne

2-7

piste

CA

UPS

2-5

piste

Expédition depuis l'entrepôt chinois d'Eryone (accessoires) 4PX 2 à 4 semaines piste
ÉTATS-UNIS, CALIFORNIE, UNION EUROPÉENNE, ROYAUME-UNI Logistique Amazon 1-7 jours nous contacter
-Retour

-Garantie : retour sans condition dans les 7 jours pour plus d'informations, veuillez consulter la page Expédition et retour

-Contact

support@eryone.com

ou de chatter avec nous en direct sur le groupe de discussion Eryone.

Dimanche, Lundi, Mardi, Mercredi, Jeudi, Vendredi, Samedi
Janvier,Février,Mars,Avril,Mai,Juin,Juillet,Août,Septembre,Octobre,Novembre,Décembre
Articles en stock insuffisant. Plus que [max] en stock.
Ajouter à la liste d'enviesParcourir la liste d'enviesSupprimer la liste d'envies
Panier d'achat

Votre panier est vide.

Return To Shop

Ajouter un message à votre commande Editer la note de votre commande
Calculer les frais de port
Ajouter un code de réduction

Calculer les frais de port

Ajouter un code de réduction

Le code de réduction fonctionnera au moment du paiement

français

Select your language

USD

Sélectionnez votre devise

PLA Silk Triple-Color Filament - 1.75mm±0.03mm (1kg)

US (TO US ONLY) / Black&Blue&Purple
US (TO US ONLY) / Black&Blue&Purple
$37.99