PLA Silk High-Speed Quadruple Filament - 1.75mm±0.03mm (1kg)
10+ rolls, from $12 per roll. Explore Bulk Sale.
Product specifications
| Printing Speed | |
|---|---|
| Nozzle temperature | |
| Build plate temperature |
Hyper Speed Quadruple Silk PLA
The Eryone High-Speed Silk PLA is a material with a thoroughly improved
formulation, offering significantly enhanced printing speeds compared to standard silk
PLA, reaching up to 500 mm/s. Additionally, its tensile strength has been notably
increased, with the Z-axis tensile strength reaching 20 MPa. This high-speed silk PLA
material delivers a more lustrous finish, presenting a silk-like appearance. The
brightness can be controlled by adjusting the temperature and speed: higher
temperatures and slower printing speeds result in increased brightness.
Part I: Suggests Printing Parameters
| Parameter | Set up |
| Nozzle temperature | 190℃-220℃ |
| Bed temperature | 55-70℃ |
| Bed material | glass, PEI, spring steel plate |
| Bottom printing temperature | 190℃-220℃ |
| Sealed printing | Open Printing/closed printing |
| Printing speed | 30-500mm/s |
| Drying conditions | 65℃-75℃，12H |
Part II: Physical Properties of Materials
| Property | Testing Method | Unit | Typical Value |
| Density(g/cm³ at 21.5 ° C） | ASTM D792 (ISO 1183, GB/T 1033) | g/cm³ | 1.32 |
| Vicat Softening Temperature(° C) | ASTM D1525 (ISO 306 GB/T 1633) | ℃ | 56 |
| Heat distortion temperature(° C | ASTM D648 1.8MPa 0.45MPa | ℃ | 50 |
| Glass transition temperature (° C) | DSC, 10 ° C/min | ℃ | 57 |
| Melt Index(g/10 min) | 220 ° C, 10kg 240 ° C, 2.16 kg | g/10min | 20±1.5 |
Part III: Mechanical Properties of Printed Samples
| Property | Test conditions | Test standards | unit | Typical Value |
| Tensile strength X-Y | 50mm/min | GB/T 1040.4 | MPa | 62.7 |
| Elastic modulus X-Y | 50mm/min | GB/T 1040.1-2006 | MPa | 1932.1 |
| Elongation at break X-Y | 50mm/min | GB/T 1040.4 | % | 2.3 |
| Tensile strength X-Z | 50mm/min | GB/T 1843 | MPa | 19.1 |
| Elastic modulus X-Z | 50mm/min | GB/T 1040.1-2006 | MPa | 1873.5 |
| Elongation at break X-Z | 50mm/min | GB/T 1040.4 | % | 1.9 |
| Bending strength | 2mm/min | GB/T 9341 | MPa | 86.7 |
| Bending modulus | 2mm/min | GB/T 9341 | MPa | 2917.3 |
| Charpy Impact strenght | 2.75J | GB/T 1843 | kJ/m2 | 3.8 |
Note: All splines are printed under the following conditions: printing temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm
Disclaimers
The values given in this data table are for reference and comparison only. They
should not be used for design specifications or quality control. The actual value may
vary depending on the printing conditions. The final performance of printed
components depends not only on the material, but also on the component design, environmental conditions, printing conditions, and so on. Product specifications are
subject to change without prior notice.
Shiny Silk Coextruded PLA
Smooth and shiny finish like real silk, no extra polishing needed. 1/4 of each combination of PLA coextruded filaments, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface.
No Warping Multicolor Filament
Perfect winded silk coextruded color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens.
Strong Layer Adhesion
This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm tri-color silk 3D printer PLA Filament is no bubble, strong layer adhesion make the printing parts stronger.
High Compatibility
1.75mm filament diameter automation control, accuracy +/- 0.03mm. Perfectly compatible with 99% of the FDM 3D Printer and 3D Pen.
FAQs
How fast can the PLA Silk High - Speed Quadruple Filament print?
It can reach a printing speed of up to 500 mm/s, which is much faster than standard silk PLA.
Can I adjust the brightness of the printed object?
Yes, you can. Higher printing temperatures and slower speeds will increase the brightness of the silk - like finish.
Will this filament work with my 3D pen?
If your 3D pen uses 1.75mm filament, it should be compatible, as this filament is suitable for 99% of FDM 3D printers and 3D pens.
How does the filament ensure good printing results?
With a precise diameter tolerance of ±0.03mm, strong layer adhesion, and being tangle - free and warping - free, it provides consistent and high - quality prints.
