PETG High-Speed Filament - 1.75mm±0.03mm (1kg)
10+ rolls, from $12 per roll. Explore Bulk Sale.
Product specifications
| Printing Speed | |
|---|---|
| Nozzle temperature | |
| Build plate temperature |
High speed PETG Review by 
Michele Dicati
ERYONE - Tutti i Test del filamento PLA + e PETG
Eryone-Hyper Speed PETG filament，It is a high-speed printing filament that can
significantly improve the printing efficiency of models without compromising print quality. The printing performance of high-speed PETG is better than that of ordinary PETG
filament, and it has higher adaptability to printer settings. It can achieve excellent printing
results without fine-tuning parameters. Due to the optimization of the formula, high-speed
PETG eliminates the problems of nozzle sticking and material leakage, making printing
smoother and details clearer. High speed PETG can maintain smooth texture and
consistent luster at any speed. High speed PETG has water resistance and sun protection, and can print some outdoor products.
Feature：
- Having higher toughnessthan PLA.
- Having higher hardness than PLA.
- The impact strength is more than 30 times that of standard PLA.
- Elongationat break is more than 50 times that of standard PLA.
- Adhesive force is stronger than that of PLA.
Specifications：
- Filament Diameter: 1.75mm
- Tolerance: ±0.03mm
- Printing Temperature: 240-280 ℃
- Heated Bed Temperature: 75-80℃
- Printing Speed:30-600mm/s
Showcase:
FAQ
1.Q: Why my filament tangles? How can I solve it?
A: The tangle of filament isn’t caused by the disordered or the imperfect winding. According to the production technology of filament, the filament winds back and forth (from left to right and then from right to left). Normally, there is no overline tangle. A common cause of tangle is that the filament end is not fixed to the holes of spool. Overline tangle or the changed winding direction make filament tangle. So customers need to fix the filament end to the proper holes of the spool.
- Q: Is PETG degradable?
A: The natural degradation process of PETG raw materials is very long, and PETG is a non-degradable material. PETG is a thermoplastic material, which can be used for secondary plastic recycling. PETG is also an environmentally friendly material.
3.Q: The nozzle is clogged by PETG, and how can I solve it?
A: Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem. So, before you get started, clean the nozzle and turn up the temperature to a proper value.
4.Q: My prints have web-like strings (stringing) issues. How can I troubleshoot it?
A: Too high temperature makes the PETG filament melt and flow so fast. Please turn the temperature down to a proper value.
The retracting parameters are improper, so adjust the retracting length and speed.
5.Q: There are too much melted filament around the nozzle. What should I do?
A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesn’t match with the extrusion output.
6.Q: The PETG filament was perfect when I opened the package. After several times of intermittent printing, my PETG filament snaps by accident during printing. Why?
A: Normally, the PETG filament in the printing process will not snap by themselves. However, after being affected by moisture, the degradable material PETG will be more brittle and easier to break, so you should pay attention to dampproof.
7.Q: The surface of my print isn’t very smooth, and the extruded filament has inconstant diameters. Why?
A: The printing temperature is too high or too low. The temperature doesn’t match well with the printing speed. You need to adjust the printing speed or temperature.
8.Q: Why my PETG-printed objects don't stick to the heated bed? How do I solve?
A: The distance between the nozzle and the bed is too far. Make sure your heated bed is levelled and it’s clean. Then judge if the printing temperature and heated bed temperature are too low, and our customers should adjust them to correct ranges.
The carbon fiber content is 6%.
Setting Specification
ERYONE 1.75mm HighSpeed PETG Filament helps you print without stringing and warping issues under optimal settings. Extrusion/Nozzle Temperature: 240°C-280°C, Heating Plate /Bed/Platform Temperature: 75-80°C, Speed: 30-500mm/s.
Clog-free & Bubble-Free
Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuuming aluminum foil packaging, which can effectively protect the PETG filament from moisture.
Less- tangle and Easy to Use
Full mechanical winding and strict manual examination, which guarantee the PETG filaments are tidy and easy to be fed; Larger spool inner diameter design makes feeding smoother.
Dimensional Accuracy & Consistency
Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PETG filaments of 1.75 mm diameter, dimensional accuracy 99% Probability + / - 0.03 mm. Compatible with 99% of FDM 3D printers.
FAQs
How much faster is the PETG High - Speed Filament compared to regular PETG?
It can reach speeds of 30 - 600mm/s, significantly improving printing efficiency compared to ordinary PETG filaments.
Why is this filament better than PLA?
It has higher toughness, hardness, and impact strength (over 30 times that of PLA), and its elongation at break is more than 50 times that of PLA.
Do I need to adjust many parameters for printing?
No, it has high adaptability to printer settings and can achieve excellent results without fine - tuning parameters.
Is the PETG High - Speed Filament suitable for outdoor use?
Yes, it has water resistance and sun protection properties, making it suitable for printing outdoor products.
