Warm tips:
1, the product is a new pre-sale products, divided into finished products (1KG) and samples (10M), there is no stock, you need to produce separately after purchase.
2, About the delivery time, the finished product delivery time is 1-2 months, the sample delivery time is 15-30 days.
3, This product requires a one-time purchase of 10 rolls to take effect, suitable for bulk purchase, the more the number of corresponding to different discounts.
BUY 60 GET 5% OFF code: Pre sale5
BUY 100 GET 10% OFF codeοΌPre sale10
BUY 200 GET 20% OFF codeοΌPre sale20
Β
Technical Specification
Print Any Model You Want with ERYONE PLA Filament.
Material: PLA
Length:340m
Diameter: 1.75mmΒ±0.03mm
Print Temperature: 190-220β
Heated Bed Temperature: 55-70Β°C
Recommended Printing Temperature: 210-220β
Recommended Print Speed: 30-100m
|
|
|
|
|
|---|---|---|---|
Neat WindingThe PLA threads are arranged neatly, without the risk of knotting that making printing more comfortable. |
Premium QualityMaterial wire diameter 1.75mmΒ±0.03mm, ensure smooth output line, vacuum packaging without bubbles, does not block nozzle, make the printing more smooth. |
Good AdhesionExcellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. |
Good Layer BondingGood layer bonding strength makes the printing parts stronger. The printed model has a smooth surface. Β |
Showcase:
FAQ Β Β Β Β
1.Q:Β Can PLA be used to print tableware?
A:Β Not recommended. Although PLA is degradable, food-grade raw material, the PLA with toner is non-food grade. If you really want to print a set of tableware, transparent PLA is suggested.
2.Q:Β The nozzle is clogged by PLA, and how can I solve it?
Β Β A: Β Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem.Β So, before you get started, clean the nozzle and turn up the temperature to a proper value.
3.Q: My prints have web-like strings (stringing)Β issues. How can I troubleshoot it?
Β Β A: Too high temperature makes the PLA filament melt and flow so fast. Please turn the temperature down to a proper value. Β
Β Β Β Β Β Β The retractingΒ parameters are improper, so adjust the retracting length and speed. Β
4.Q: There are too much melted filament around the nozzle. What should I do?
Β Β A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesnβt match with the extrusion output.
5.Q: The PLA filament was perfect when I opened the package. After several times of intermittent printing, my PLA filament snaps by accident during printing. Why?
A: Normally, the PLA filament in the printing process will not snap by themselves. However, after being affected by moisture, the degradable material PLA will be more brittle and easier to break, so you should pay attention to dampproof.
6.Q: The surface of my print isnβt very smooth, and the extruded filament hasΒ inconstant diameters. Why?
Β Β A: The printing temperature is too high or too low. The temperature doesnβt match well with the printing speed. You need to adjust the printing speed or temperature.
7.Q:Β Why my PLA-printed objects don't stick to the heated bed? How do I solve?
A:Β The distance between the nozzle and the bed is too far. Make sure your heated bed is leveled and itβs clean. Then judge if the printing temperature and heated bed temperatureΒ are too low, and our customers should adjust them to correct ranges.
