Best Seller

·Read TEST BLOG  by Eryone QC Andy When.

·Like silk, Highlight shiny silky smooth appearance.
·PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
·1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15
·Recommended Extrusion/Nozzle Temperature 190℃-220℃

Diameter: 1.75mm
·Tolerance: +/-0.03mm
·Print Temperature: 195-215℃
·Recommended Print Speed: 30-60mm/s

Matte PLA review by Parliamo di Maker The Art of Matte  There are light and darkness,luminance and matte,now that Eryone has shiny silk pla,but in 3D printing,we also need  filament...

·Reviewed by John Aldred 
Eryone PLA+ 3D printer filament.Is it better than PETG?
·Review by Andrew Sink  
3D Printing with REALLY WET filament / Eryone PLA+
 
·Tougher than Standard PLA.
·Accurate filament diameter(mm)1.75±0.03，Extrude smoothly under 200 ℃.
·Wide temp adaptation,Print very good between 190-230℃ without clogging.
·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220℃.
·Work very well on your printers..
·Net weight 1kg, Shipping weight 1.28kg .
·Recommend print temperature (℃) 200~230.
·Recommend print speed(mm/s) 30~70.
·Recommend heated bed(℃) 60~70

·Read TEST BLOG by Eryone QC Andy When.

·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg

·Status:in manufacture Feb,8th

·15% OFF code"PREORDER *at checkout,ship upon arrival in April,preorder ends in Mar.15 th
·Silky Metallic rainbow PLA,bringing exciting visual experience.

Ender3/CR10/Mega-S/Thinker S/Thinker SE/ER-20 WITH BOWDEN EXTRUDER
Nozzle temperature: 190~220℃ Heated bed temperature 
1) PEI Magnetic print surface: 55~70℃
2) Glass Bed: 65~70℃
Printer speed: 30~60mm/s
Retract speed: 80~100mm/s
Retract length: 4~5mm
Prusa i3 MK2/MK3/MK3S WITH DIRECT DRIVE EXTRUDER Nozzle temperature: 190~220℃ Heated bed temperature
1) PEI Magnetic print surface: 55~70℃
Printer speed: 30~60mm/s
Retract speed: 30~40mm/s
Retract length: 0.8~1.5mm

Review by Robin3DVerse “3D Printed Mandalorian- Support-Free || 3D Printing Timelapse”
Filament diameter(mm) 1.75±0.03
Net weight 1kg, Shipping weight 1.28kg 
Recommend print temperature (℃) 210~230
Recommend print speed(mm/s) 30~60

·Printing Temperature: 190℃-220℃ 1.75mm, demission tolerance +/- 0.05mm
Tangle Free,Jammed Free
Net weight 1kg, Shipping weight 1.28kg 
Diameter: 1.75mm
Tolerance: ± 0.02mm Print Temperature: 190-220℃ Recommended Print Speed: 50-100mm/s