Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg
Β·Reviewed by John Aldred
Eryone PLA+ 3D printer filament.Is it better than PETG?
Β·Review by Andrew Sink
3D Printing with REALLY WET filament / Eryone PLA+
Β·Tougher than Standard PLA.
Β·Accurate filament diameter(mm)1.75Β±0.03οΌExtrude smoothly under 200 β.
Β·Wide temp adaptation,Print very good between 190-230β without clogging.
Β·You can get the most outstanding ,glossy,smooth ,beautiful prints between 200-220β.
Β·Work very well on your printers..
Β·Net weight 1kg, Shipping weight 1.28kg .
Β·Recommend print temperature (β) 200~230.
Β·Recommend print speed(mm/s) 30~70.
Β·Recommend heated bed(β) 60~70
Β·Operating temp range: 220β-240βοΌ446Β°F-464Β°F),heated Bed Temp: 80Β°C - 90Β°C (176β - 194β). Note: Printing temperature of first layer should be over 230β
Β·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
Β·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg
Β·Operating temp range: 220β-240βοΌ446Β°F-464Β°F),heated Bed Temp: 80Β°C - 90Β°C (176β - 194β). Note: Printing temperature of first layer should be over 230β
Β·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
Β·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
Β·Read TEST BLOG by Eryone QC Andy When.
Β·Print Temperature Range: 190-220β
Β·1.75mm, tolerance +/- 0.05mm
Β·Tangle Free: Specially designed to reduce Tangling
Β·Jam Free: Specially designed to reduce nozzle jams
Β·Weight: Net weight 1kg, Shipping weight 1.28kg
View Certifications
View recommended setting
Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometerοΌ25β)
Lifting height: 5mm
Lifting speed: 100-300mm/min
15% OFF preorder code PREORDER ,preorder ends in March 31th,ship upon arrival in April
View recommended setting
Specification: 0.5KG/bottle
Color: Black, white, gray, clear, red orange, transparent blue.
The exposure time of the bottom layers: 50-100s (chromatic color display), 25-40s (monochrome display)
The Exposure Time: 4-8s (chromatic color display), 3-4s (monochrome display)
The number of bottom layers: 4-10 layers
Density: 1.05-1.25g/cm3 (densitometer (25β))
Lifting Height: 5-10mm
Lifting Speed: 100-200mm/min
View Certifications
View recommended setting
Specification: 0.5KG
Color: Black, white, gray, transparent, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometerοΌ25βοΌ)
Lifting height: 5mm
Lifting speed: 100-300mm/min