Eryone
STANDARD PLA
à partir de $13.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
à partir de $13.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
PETG
à partir de $12.00·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
STANDARD PLA
à partir de $13.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
PLA PAILLETTES
·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
·Professional Packaging - Vacuumed Sealed with a desiccant bag
·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Print Temperature: 195- 230℃
·Recommended Print Speed: 30-60mm/s
·Online Tech Support √
PLA EN SOIE AVANCÉ(plus brillant et plus brillant que le PLA de soie)
à partir de $15.99Diameter: 1.75mm
·Tolerance: +/-0.03mm
·Print Temperature: 195-215℃
·Recommended Print Speed: 30-60mm/s
PETG
à partir de $11.99·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
STANDARD PLA
à partir de $12.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
à partir de $12.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
$13.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
PETG
$11.00·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
STANDARD PLA
à partir de $12.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
à partir de $12.00·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
à partir de $29.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
$31.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
$29.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
à partir de $29.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
$32.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
$34.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
RÉSINE STANDARD (500G)
$23.99View Certifications
View recommended setting
Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃)
Lifting height: 5mm
Lifting speed: 100-300mm/min
BOWDEN TUBE
$13.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
CEINTURE GT2
$13.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
COUVERCLE EN SILICONE BLOC THERMIQUE
$13.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
GORGES HOTEND
$12.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
RÉSINE STANDARD (500G)
View Certifications
View recommended setting
Specification: 0.5KG/1KG.
Color: Black, white, gray, clear, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃)
Lifting height: 5mm
Lifting speed: 100-300mm/min
STEPPER MOTO COUPLER
$15.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
CARTE MÈRE THINKER 2560
$69.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
LIT CHAUFFÉ DE PLATE-FORME EN VERRE
$45.00P R O D U C T I N F O R M A T I O N Compatibilité large : la plate-forme d’imprimante 3D en verre de 310*310mm,4mm d’épaisseur...
ERYONE TMC2208 STEPPER MOTO DRIVER(5 PCS)
P R O D U C T I N F O R M A T I O N Eryone TMC2208 3D Printer Stepper Motor Driver Module TMC2208 is an ultra-quiet...
CONDUCTEUR DE MOTEUR PAS À PAS TMC2209
$32.99Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
RÉSINE DE RINÇAGE À L'EAU (500G)
View Certifications
View recommended setting
Specification: 0.5KG
Color: Black, white, gray, transparent, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃）)
Lifting height: 5mm
Lifting speed: 100-300mm/min
RÉSINE DE RINÇAGE À L'EAU (500G)
à partir de $11.99View Certifications
View recommended setting
Specification: 0.5KG
Color: Black, white, gray, transparent, skin tone, magenta, cyan, yellow.
The exposure time of the bottom layers: 40-120s.
The number of bottom layers: 4-10 layers
The exposure time: 4-10s
Density: 1.05-1.25g/cm3 (densitometer（25℃）)
Lifting height: 5mm
Lifting speed: 100-300mm/min
HOTEND (HOTEND)
$25.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
HOTEND (HOTEND)
$25.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
ÉCRAN INTELLIGENT LCD12864
$30.00Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
LIMIT SWITCH
$15.00About Eryone Eryone Limit Switch Note:the item is shipped from Eryone Chinese local stock to worldwide country with free shipping,which will take approximately 2-3 weeks,tracking number will update on order...
Buse
$12.75Most Eryone Accessories now ship from Eryone Local CHINA warehouse,which could take 2-4 weeks to arrive in your countries.
PETG
à partir de $25.99·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
STANDARD PLA
$29.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
PETG
$31.99·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
PETG
$29.99·Operating temp range: 220℃-240℃（446°F-464°F),heated Bed Temp: 80°C - 90°C (176℉ - 194℉). Note: Printing temperature of first layer should be over 230℃
·As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
·Sweet warm tips: Pls print a temp tower first to find out the best temp setting before print the bigger size printing.
STANDARD PLA
$29.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
à partir de $27.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
STANDARD PLA
$27.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
PLA PAILLETTES
$37.99·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
·Professional Packaging - Vacuumed Sealed with a desiccant bag
·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Print Temperature: 195- 230℃
·Recommended Print Speed: 30-60mm/s
·Online Tech Support √
STANDARD PLA
$29.99·Read TEST BLOG by Eryone QC Andy When.
·Print Temperature Range: 190-220℃
·1.75mm, tolerance +/- 0.05mm
·Tangle Free: Specially designed to reduce Tangling
·Jam Free: Specially designed to reduce nozzle jams
·Weight: Net weight 1kg, Shipping weight 1.28kg
PLA ARC-EN-CIEL CLASSIQUE
$34.99·For color change effect, please print Large work. About 4~10m/color.
·Professional Packaging | Vacuumed Sealed, 1.75mm and +/-0.05mm tolerance.
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Recommended Extrusion/Nozzle Temperature 195 - 215℃
GLOW IN DARK (VERT) PLA
$32.99·Glow Green in the Dark for fun
·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
·Vacuumed Sealed with a desiccant bag
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Print temperature 200-220℃, print speed 40mm/s
PLA EN MARBRE
$29.99·Read TEST BLOG by Eryone QC Andy When.
·Marble effect: marble PLA is a mixture of pure PLA and healthy&safety marble elements, which produces natural marble effect.
·1.75mm in diameter and tolerance +/-0.05mm.
·Recommended Extrusion/Nozzle Temperature 190 - 220℃ (374 - 428° F )
·Marble 3D Printer PLA Filament Vacuumed Sealed With Desiccant
·Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
PLA PAILLETTES
à partir de $39.99·Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
·Professional Packaging - Vacuumed Sealed with a desiccant bag
·1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
·1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
·Print Temperature: 195- 230℃
·Recommended Print Speed: 30-60mm/s
·Online Tech Support √