PLA + (PLA più resistente, facile da usare)
10+ rolls, from $14 per roll.Explore Bulk Sale.
Product specifications
Printing Speed | |
---|---|
Nozzle temperature | |
Build plate temperature |
PLA PLUS, ROBUSTEZZA PLUS
Rispetto al PLA standard, il PLA + ha migliorato lo svantaggio della tenacità del PLA non buona. La qualità delle parti stampate è ancora molto buona e la stessa del PLA standard.
Perché è speciale
Buona adattabilità alla temperatura, può ottenere buoni risultati di stampa nell'intervallo di 200 ~ 230 ℃
Più adatto per i principianti
Buona fluidità, compatibile con la maggior parte delle stampanti 3D FDM sul mercato
La superficie di stampa è liscia e l'effetto è buono
Più resistente del PLA, migliori prestazioni di resistenza alla trazione
Specifica
Spec. |
Valore |
Diametro del filamento (mm) |
1.75±0.03 |
N.W (kg) |
1 |
Peso specifico (g / cm3) |
1.24 |
Consiglia temperatura di stampa (℃) |
200~230 |
Consiglia velocità di stampa (mm / s) |
30~70 |
Consiglia letto riscaldato (℃) |
60~70 |
Temperatura di deflessione del calore (0,45 MPa) (℃) |
60 |
Assorbimento dell'umidità |
Cattivo |
Consiglia la temperatura di conservazione (℃) |
0~32 |
Domande frequenti
Se il filamento non viene utilizzato per un lungo periodo, tenerlo in un ambiente fresco (temperatura inferiore a 32 ℃) e asciutto (umidità inferiore al 40%) per tempo.
Utilizzare un panno morbido per pulire gli ugelli prima e dopo la stampa per evitare che il filamento residuo influenzi la stampante
Se c'è un problema di intasamento, controllare se la molla di alimentazione è troppo allentata e fa sì che il consumabile slitti / troppo stretto, il che causa il danneggiamento del filamento dall'ingranaggio;

High-Speed PLA+ 1.75mm
Eryone premium High-Speed filament PLA+ easy to use, which can better meet the high performance requirements of high-speed 3D printers.

Print Faster
Printing speed 30-500mm/s, a huge speed improvement, saving your time.

Wide Compatibility
PLA+ High-Speed Filament:Compatible with most FDM 3D printers, easy to use. Print temperature range: 190°C-230°C; Bed: 60-70°C.

Weight and Spool Diameter
Net weight 1kg, shipping weight 1.35kg; spool inner diameter 57mm, spool outer diameter 200mm, height 64mm.
FAQs
What is the maximum printing speed of Eryone High - Speed PLA+?
The maximum printing speed of this filament can reach up to 600mm/s, allowing for fast production of your 3D prints.
Is this filament suitable for all 3D printers?
Eryone High - Speed PLA+ is suitable for 99% of common - used FDM 3D printers. However, it's recommended to check your printer's compatibility before use.
What is the temperature range for printing this PLA+ High-Speed Filament?
The printing temperature should be set between 190 - 230℃, and the heated bed temperature should be in the range of 35 - 60℃.
Is Eryone High - Speed PLA+ safe to use?
Yes, it is environmentally - friendly, odorless, and non - toxic, ensuring a safe 3D printing experience.
You may also like
Combine your style with these products