-50%

CERPRISE PETG Filament 1.75mm1kg (EU Only))

$27.99 $14.00

Shipping calculated at checkout.

Hurry up! SALE ENDS IN

dayshoursminssecs

Color: Black

  • Black
  • White
  • Gray
  • CLEAR
  • TRANS Red
  • TRANS Blue

SHIP TO: EU

  • EU

Technical Specification                                                       

  • Filament Diameter: 1.75mm
  • Tolerance: ±0.03mm
  • Printing Temperature: 230°C-250°C
  • Heated Bed Temperature: 70-85°C
  • Printing Speed: 30-80mm/s

Features

High Dimensional Accuracy & Stronger Layer Adhesion: 1.75mm, tolerance +/-0.03mm.

Stronger layer adhesion than PLA.

Higher Toughness & Hardness: Elongation at break is 50 times that of standard PLA. The impact strength is 30 times that of standard PLA.                   

High Quality: High gloss, no bubble or dust inside, hardly clog the nozzle or extruder.                               

No Tangling: Perfect 100% winded, tangle-free before unopened, no curling or warping.  

High Compatibility: Compatibility with 99% common-used FDM 3D printers in the market.

Relevant Parameters of Recommended Machine Types

Relevant Parameters of Recommended Machine Types

Type

Extruder Type/Heated Bed Type

Parameter

Creality Ender 3

Bowden/Flexible Bed Sticker

Printing Temperature: 230-240℃

Heated Bed Temperature: 70-80℃

Printing Speed: 30-65mm/s

Retracting Length: 2-4mm

Retracting Speed: 60-100mm/s

Creality CR-10

Bowden/Glass Bed

Printing Temperature: 230-240℃

Heated Bed Temperature: 75-85℃

 Printing Speed: 30-60mm/s

Retracting Length: 2-5mm

Retracting Speed: 80-110mm/s

 

 

Anycubic Mega-S

 

Bowden/ Microporous Coating Glass Bed

Printing Temperature: 230-240℃  

Heated Bed Temperature: 75-85℃

Printing Speed: 30-80mm/s

Retracting Length: 2-4mm

Retracting Speed: 70-100mm/s

Prusa i3

Direct Drive Extruder/PEI Bed Sticker

Printing Temperature: 230-240℃

Heated Bed Temperature: 70-80℃

Printing Speed: 30-100mm/s

Retracting Length: 0.8mm

Retracting Speed: 30-40mm/s

Eryone Thinker S

Bowden/PEI Bed Sticker

Printing Temperature: 230-240℃

Heated Bed Temperature: 70-80℃

Printing Speed: 30-60mm/s

Retracting Length: 4mm

Retracting Speed: 90-110mm/s

Eryone Thinker SE

Bowden/Glass Bed

Printing Temperature: 230-240℃

Heated Bed Temperature: 75-85℃

Printing Speed: 30-70mm/s

Retracting Length: 4mm

Retracting Speed: 80-110mm/s

Eryone Thinker ER-20

Bowden/Silk-Screen Glass Bed

Printing Temperature: 230-240℃

Heated Bed Temperature: 75-85℃

Printing Speed: 30-100mm/s

Retracting Length: 2-5mm

Retracting Speed: 80-110mm/s

    FAQ

    1.Q: There are too much melted filament around the nozzle. What should I do?

      A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesn’t match with the extrusion output.

    2.Q: The PETG filament was perfect when I opened the package. After several times of intermittent printing, my PETG filament snaps by accident during printing. Why?

    A: Normally, the PETG filament in the printing process will not snap by themselves. However, after being affected by moisture, the degradable material PETG will be more brittle and easier to break, so you should pay attention to dampproof.

    3.Q: The surface of my print isn’t very smooth, and the extruded filament has inconstant diameters. Why?

      A: The printing temperature is too high or too low. The temperature doesn’t match well with the printing speed. You need to adjust the printing speed or temperature.

    4.Q: Why my PETG-printed objects don't stick to the heated bed? How do I solve?

    A: The distance between the nozzle and the bed is too far. Make sure your heated bed is levelled and it’s clean. Then judge if the printing temperature and heated bed temperature are too low, and our customers should adjust them to correct ranges.

    5.Q: Why my filament tangles? How can I solve it?

    A: The tangle of filament isn’t caused by the disordered or the imperfect winding. According to the production technology of filament, the filament winds back and forth (from left to right and then from right to left). Normally, there is no overline tangle. A common cause of tangle is that the filament end is not fixed to the holes of spool. Overline tangle or the changed winding direction make filament tangle. So customers need to fix the filament end to the proper holes of the spool.

    1. Q: Is PETG degradable?

    A: The natural degradation process of PETG raw materials is very long, and PETG is a non-degradable material. PETG is a thermoplastic material, which can be used for secondary plastic recycling. PETG is also an environmentally friendly material.

    7.Q: The nozzle is clogged by PETG, and how can I solve it?

      A:  Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem. So, before you get started, clean the nozzle and turn up the temperature to a proper value.

    8.Q: My prints have web-like strings (stringing) issues. How can I troubleshoot it?

      A: Too high temperature makes the PETG filament melt and flow so fast. Please turn the temperature down to a proper value.  

          The retracting parameters are improper, so adjust the retracting length and speed.  

    La base di conoscenza di Eryone3d di Delivery&Return

    -Tempo di trasporto e di consegna

    -Come risultato della vendita di Eryone3d in più regioni.quindi l'efficienza di spedizione varia da regioni a regioni vettori a vettori. le seguenti informazioni sono solo a titolo di riferimento.

    -Traccia il mio ordine first.first.first potresti utilizzare il sito web del vettore sottostante con il numero di tracking che ti viene inviato da noi

    -A causa dell'impatto dell'epidemia, la logistica ne risentirà. Vi prego di capire e di aspettare pazientemente.

    Regione

    Vettore

    Tempi di consegna (giorno)

    Sito web del vettore

    Germania

    DHL

    2-3

    traccia

    Francia

    DHL

    4-6 traccia

    Altri paesi dell'UE (Italia, Spagna, ecc.)

    DHL

    4-6

    traccia

    Altri paesi dell'UE

    GSL

    4-6

    traccia

    Altri paesi dell'UE DPD 4-6 traccia

    REGNO UNITO

    Posta Reale

    1-5

    traccia

    US

    Fedex

    2-5

    traccia

    US

    UPS

    2-7

    traccia

    US

    USPS

    2-7

    traccia

    CA

    Fedex

    1-5

    traccia

    CA

    Posta canadese

    2-7

    traccia

    CA

    UPS

    2-5

    traccia

    Spedizione da magazzino cinese Eryone (accessori) 4PX 2-4 settimane traccia
    USA,CA,UE,UK Logistica di Amazon 1-7 giorni contattaci

    -Ritorno

    -Garanzia:tornare senza condizione entro 7 giorni per più, si prega di leggere Spedizione &Ritorno Pagina

    -Contatto

    support@eryone.com

    o chiacchierare in diretta con noi sul gruppo Eryone livechat.

    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    January,February,March,April,May,June,July,August,September,October,November,December
    Not enough items available. Only [max] left.
    Aggiungi alla lista dei desideriSfoglia la lista dei desideriRimuovi la lista dei desideri
    Shopping cart

    Your cart is empty.

    Return To Shop

    Add Order Note Edit Order Note
    Estimate Shipping
    Add A Coupon

    Estimate Shipping

    Add A Coupon

    Coupon code will work on checkout page

    Italiano

    Select your language

    USD

    Seleziona la tua valuta

    CERPRISE PETG Filament 1.75mm1kg (EU Only))

    Black / EU
    Black / EU
    $27.99 $14.00