PLA OPACO(finitura opaca straordinaria, buona resistenza, facile da usare)
10+ rolls, from $16 per roll. Explore Bulk Sale.
Product specifications
Printing Speed | |
---|---|
Nozzle temperature | |
Build plate temperature |
The Art of Matte
Ci sono luce e oscurità, luminanza e opaco, ora che Eryone ha il pla di seta lucido, ma nella stampa 3D, abbiamo anche bisogno di un filamento artistico ed estetico come il PLA opaco.
Perché è speciale
La speciale texture opaca e satinata della superficie di stampa
Buona liquidità e può diminuire la possibilità di intasamento
Basato sul materiale PLA significa che è facile da usare, compatibile con la maggior parte delle stampanti 3d fdm / fff
Applicazione nel campo della creazione artistica, l'effetto è molto buono
La tenacità di questo tipo di filamento è migliore del normale PLA.
Specifica
Spec. |
Valore |
Diametro del filamento (mm) |
1.75±0.03 |
N.W (kg) |
1 |
Densità (g / cm3) |
1.45 |
Consiglia temperatura di stampa (℃) |
200~215 |
Consiglia velocità di stampa (mm / s) |
30~60 |
Consiglia letto riscaldato (℃) |
60~70 |
Temperatura di deflessione del calore (0,45 MPa) (℃) |
50~55 |
Assorbimento dell'umidità |
Normale |
Consiglia la temperatura di conservazione (℃) |
0~32 |
Quanto guadagni
1 kg (2,2 libbre) / rotolo
Domande frequenti
Se il filamento non viene utilizzato per un lungo periodo, tenerlo in un ambiente fresco (temperatura inferiore a 32 ℃) e asciutto (umidità inferiore al 40%) nel tempo
Utilizzare un panno morbido per pulire gli ugelli prima e dopo la stampa per evitare che il filamento residuo influisca sulla stampante,
Se c'è un problema di intasamento, controllare se la molla di alimentazione è troppo allentata e fa sì che il consumabile slitti / troppo stretto, il che causa il danneggiamento del filamento dall'ingranaggio;

PLA Matte Filament
Frosted texture, simple and elegant colors.

Print Temperature Range & Diameter
190℃-220℃. 1.75mm (tolerance ±0.03mm).

High Quality
PLA Matte Filament:Good toughness, low shrinkage and superb layer bonding. No bubble or dust inside, neatly rolled to reduce clog or tangling.

Product information
PLA Matte Filament:N.W: 1kg, G.W: 1.35kg, spool inner diameter 57mm, spool outer diameter 200mm, height 64mm.
FAQs
What makes the PLA Matte Filament suitable for printing artwork?
Its delicate matte surface effect, soft texture, and near - invisible layer lines give printed artworks a high - end and refined look.
What is the recommended printing speed for this filament?
PLA Matte Filament:The printing speed can range from 30 - 100mm/s. You can adjust it based on your 3D printer and the complexity of your design.
Can I use any bed material with this filament?
This PLA Matte Filament is compatible with glass, PEI, and spring steel plate bed materials, providing you with several options for optimal adhesion.
How should I prepare the filament before printing?
Dry the PLA Matte Filament at 65 - 75℃ for 12 hours. This helps ensure a smooth printing process by removing any moisture that could cause issues like bubbling.